Fly ash rotary dryer is also known as the three layers of drum dryer, three return cylinder dryer, on the basis of the single cylinder dryer, developed and manufactured, which is an industrial dryer on non-viscous, liquid material. At present three-cylinder dryer made by Dingli company, with mature technology, through the drying of the sand, fly ash, fly, mineral materials, slag and other material, the effect is very good.
The fly ash is conveyed to silo by belt conveyor or bucket elevator, and transport to the feed end by the feeder of the silo . The inclination of the feeding pipeline should exceed the natural inclination of materials so that to facilitate sand flowing into the fly ash dryer smoothly. The rotating cylinder of the dryer is slightly inclined to the horizon. To feed the material from the higher end and the heat carrier enter from the lower end, such produce adverse contact between them .sometimes, they can be fed to the cylinder together. As the cylinder running, the sand carried to the lower side by the gravity. In the process of moving forward, the wet raw material being roasted by the heat directly or indirectly to make the raw material to dry quickly, the final products discharge out by belt conveyor or screw conveyor. There is a shoveling plate installed in the fly ash dryer with the function of shoveling the materials up and down, to enlarge the contact area between airflow and materials and to enhance the efficiency and make the material running quickly. The heat carrier is hot air, the flue gas, etc. After the dryer process, It needs a cyclone dust collector to catch the items in the airflow. You should use a bag type or wet-type dust collector and afterward discharge the waste gas if you intend to further reduce the dust load of the exhaust.
The fly ash is conveyed to silo by belt conveyor or bucket elevator, and transport to the feed end by the feeder of the silo . The inclination of the feeding pipeline should exceed the natural inclination of materials so that to facilitate sand flowing into the fly ash dryer smoothly. The rotating cylinder of the dryer is slightly inclined to the horizon. To feed the material from the higher end and the heat carrier enter from the lower end, such produce adverse contact between them .sometimes, they can be fed to the cylinder together. As the cylinder running, the sand carried to the lower side by the gravity. In the process of moving forward, the wet raw material being roasted by the heat directly or indirectly to make the raw material to dry quickly, the final products discharge out by belt conveyor or screw conveyor. There is a shoveling plate installed in the fly ash dryer with the function of shoveling the materials up and down, to enlarge the contact area between airflow and materials and to enhance the efficiency and make the material running quickly. The heat carrier is hot air, the flue gas, etc. After the dryer process, It needs a cyclone dust collector to catch the items in the airflow. You should use a bag type or wet-type dust collector and afterward discharge the waste gas if you intend to further reduce the dust load of the exhaust.
| Model (m) | Capacity (T/H) | Coal consumption kg/t | Total power | ||
|---|---|---|---|---|---|
| Φ2.0×5 | 12-15 | 10-12 | 4kw×2 | ||
| Φ2.2×5 | 14-18 | 10-12 | 5.5kw×2 | ||
| Φ2.5×5 | 23-28 | 10-12 | 5.5kw×4 | ||
| Φ2.8×6 | 30-35 | 10-12 | 5.5kw×4 | ||
| Φ3.0×6 | 35-40 | 8-10 | 7.5kw×4 | ||
| Φ3.0×7 | 40-45 | 8-10 | 7.5kw×4 | ||
| Φ3.2×7 | 45-50 | 8-10 | 11kw×4 | ||
| Φ3.2×8 | 50-55 | 8-10 | 11kw×4 | ||
| Φ3.6×8 | 60-70 | 6-8 | 15kw×4 | ||
| Φ3.8×9 | 70-80 | 6-8 | 15kw×4 | ||
| Φ4.0×10 | 90-100 | 6-8 | 18.5kw×4 | ||
| Φ4.2×8.5 | 80-100 | 6-8 | 18.5kw×4 | ||
| （The output is set according to moisture : dry from 15% to 1-3%） | |||||
.png)
Need the price for the complete set up for Hammering -Crushing, Drying, Pressing, cooling, sorting packing in an automated line with site requirement details.
Good morning i'I am from Tunisia please can you send me the technical information and price of the sand dryer capacity 20 T/h diesel
Hi, we are looking for coal dryer with 850 tons per day input. Please send me the cost of complete installation in Rajasthan India.
Please can you sent me the details and process cost of the Iron ore dryer. And the price of the machines
Dryer and granulation - We want to produce organic fertilizer using chicken waste and cow manure as well as lime kindly avail your best price of 10 / 30 tone capacity per hour
I'm from Thailand. Please let me know if your dryer system will work for drying pineapple skins or mango pulp waste?
Please me your quotation for a 2 tons/hr, and 4 tph capacitiy Rotary Drum Dryers for Wood Chips from medium-hard wood, with about 60% moisture content.
Hi I am a moroccan olive oil producer and I would need a quote for an olive pomace dryer with a capacity of 500T per day thank you i n advance for your help
We require a price quote for a rotary dryer with a capacity of 250 tons per day. The input material is a copper concentrate with 16% humidity; we need the output humidity to be 10%.
Coffee spent drying 55% to 25%, may I get the price of the Steam Tube Rotary Dryer model: DLSG1912, capacity 100 ton/day please.
Could I please have a quote on a drying system - we have a wood shaver and would like to purchase a dryer that can do 3tonne per hour.
Will your equipment be able to dry out granite with 8% moisture content. Production Rate 20 tons an hour. What medium would you use for heat source?
I'm interested in getting some information about a rotary dryer, specifically regarding its pricing. Raw material we'll be working with is sugarcane bagasse. Our daily capacity stands at 35 tons
I want to know the price for the muncipal waste dryer and if you have a whole asssembly line to make Charcoal Briquette on a large scale
I Required baggase dryer for 8 ton per hours with 55% moisture.Please kindly send your best quotation and product specifications.Regards
0.2 x 5 cap 15t/h, What will it cost me to have this size of Sand dryer? Please your quote is most needed
Please send cost of wood chips dryer and full information use in pakistan. Capacity 10-15 tons per hr.
Do you have 5-10 ton/h capacity available and what is the price for the whole wood sawdust drying plant including moulding machines and packaging
Can this dryer dry pine wood shavings? And if so at what capacity? My shavings are 80% wet and needs to come down to 8% or 10% moisture
I am interested in this plant equipment mainly to dry coffee grounds. Send me Coffee grounds drying machine video demonstration of DLGT2218 and DLGT 2523.
Wood Pellet plant. 2.5 to 3 ton per hour, I want to setup our own biocoal and pellet plant In morena mp so I want to know about a price of machineries.
I am interested in installing a complete wood pellet production line. Kindly provide me with all the relevant details, including specifications and pricing.
Silica sand dryer 20-30t/h production best price quotation manual oprater
Need coal upgrade plant 500 tons per day. Please confirm how much sulphur can be reduced in our plant.
l need a Sludge Dryer for stp that can process about 200 tons per day. Please share all details with price.
Informations about and how much is the coast to dry raw coal 1000 to 2000 tons per day
I would like to ask for a price quotation for sand dryer, how much is the one which makes 50 tones per hour after reaching my country
Please submit quote for complete biomass pellets production line of 2.5 - 3 TPH. Raw material would be saw dust, Rice straw
2 Tons/PH Pellet plant,Raw material: Biomas residue like rice husk. I am interested to buy biomass drying &pellet plant. Can I use agricultural waste too in your machine?
I am interested in setting up Biomass Pellet Production Line. Please let me know the setup cost of the Pellet Production Line.--DLKL3000
