Sawdust dryer is a special equipment specially designed and manufactured for drying wood chips, sawdust, wood flour and other materials. It has the characteristics of large drying output, remarkable energy saving effect and low maintenance. The main working principle is: the sawdust enters the sawdust dryer by the combined material plate and the rotating cylinder body, the material is boiled and fluidized in the cylinder, and the hot air fully touches the material to complete the drying.
The maintenance of the sawdust dryer is an extremely important and regular job. It should be closely coordinated with the extremely operation and maintenance, etc., and there should be full-time personnel to carry out the duty inspection.
Installation test
1. The equipment should be installed on a horizontal concrete foundation and fixed with anchor bolts.
2. When installing, pay attention to the vertical of the main body and the horizontal.
3. After installation, check whether the bolts of each part are loose and whether the door of the host machine is tightened. If so, please tighten it.
4. Configure the power cord and control switch according to the power of the device.
5. After the inspection is completed, carry out the no-load test run, and the test run can be carried out normally.
Machine maintenance
1. The shaft bears the full load of the negative machine, so good lubrication has a great relationship with the bearing life. It directly affects the service life and operating rate of the machine. Therefore, the injected lubricant must be clean and the seal must be good. The main oil injection point (1) rotating bearing (2) roller bearing (3) all gears (4) movable bearing and sliding plane.
2. Newly installed wheels are prone to loosening and must be checked frequently.
3. Pay attention to whether the work of each part of the machine is normal.
4. Pay attention to check the degree of wear of easy-wear parts, and pay attention to replace worn parts at any time.
5. The bottom plane of the mobile device should be free of dust and other objects to prevent the movable bearing from moving on the bottom frame when the machine encounters materials that cannot be broken, resulting in a serious accident.
6. If the bearing oil temperature rises, it should be stopped immediately to check the cause and eliminate it.
7. If there is impact sound when the rotating gear is running, it should be stopped and checked immediately and eliminated.
Zhengzhou Dingli is a professional wood chip dryer manufacturer integrating R&D, production and sales, if you are interested, please contact us online.
If you are looking for related products or have any other questions
Please Contact Us.png)
Good morning i'I am from Tunisia please can you send me the technical information and price of the sand dryer capacity 20 T/h diesel
Hi, we are looking for coal dryer with 850 tons per day input. Please send me the cost of complete installation in Rajasthan India.
Silica sand dryer 20-30t/h production best price quotation manual oprater
Dryer and granulation - We want to produce organic fertilizer using chicken waste and cow manure as well as lime kindly avail your best price of 10 / 30 tone capacity per hour
Please me your quotation for a 2 tons/hr, and 4 tph capacitiy Rotary Drum Dryers for Wood Chips from medium-hard wood, with about 60% moisture content.
Hi I am a moroccan olive oil producer and I would need a quote for an olive pomace dryer with a capacity of 500T per day thank you i n advance for your help
We require a price quote for a rotary dryer with a capacity of 250 tons per day. The input material is a copper concentrate with 16% humidity; we need the output humidity to be 10%.
Could I please have a quote on a drying system - we have a wood shaver and would like to purchase a dryer that can do 3tonne per hour.
Will your equipment be able to dry out granite with 8% moisture content. Production Rate 20 tons an hour. What medium would you use for heat source?
l need a Sludge Dryer for stp that can process about 200 tons per day. Please share all details with price.
I'm from Thailand. Please let me know if your dryer system will work for drying pineapple skins or mango pulp waste?
I'm interested in getting some information about a rotary dryer, specifically regarding its pricing. Raw material we'll be working with is sugarcane bagasse. Our daily capacity stands at 35 tons
I would like to ask for a price quotetion for sand dryer, how much is the one which makes 30 tones per hour after reaching my country
I want to know the price for the muncipal waste dryer and if you have a whole asssembly line to make Charcoal Briquette on a large scale
Pellet plant. 2.5 to 3 ton per hour, I want to setup our own biocoal and pellet plant In morena mp so I want to know about a price of machineries.
I Required baggase dryer for 8 ton per hours with 55% moisture.Please kindly send your best quotation and product specifications.Regards
I am interested in this plant equipment mainly to dry coffee grounds. Send me Coffee grounds drying machine video demonstration of DLGT2218 and DLGT 2523.
0.2 x 5 cap 15t/h, What will it cost me to have this size of Sand dryer? Please your quote is most needed
Informations about and how much is the coast to dry raw coal 1000 to 2000 tons per day
Please send cost of wood chips dryier and full information use in pakistan. Capacity 5-8 tons per hr.
Do you have 5-10 ton/h capacity available and what is the price for the whole wood sawdust drying biochar plant including moulding machines and packaging
Need coal upgrade plant 500 tons per day. Please confirm how much sulphur can be reduced in our plant.
Can this dryer dry pine wood shavings? And if so at what capacity? My shavings are 80% wet and needs to come down to 8% or 10% moisture
Please can you sent me the details and process cost of the Iron ore dryer. And the price of the machines
2 Tons/PH Pellet plant,Raw material: Biomas residus like rice husk. I am interested to buy biomass drying &pellet plant. Can I use agricultural waste too in your machine?
Coffee spent drying 55% to 25%, may I get the price of the Steam Tube Rotary Dryer model: DLSG1210, capacity 40 ton/day please.
Need the price for the complete set up for Hammering -Crushing, Drying, Pressing, cooling, sorting packing in an automated line with site requirement details.
I am interested in setting up Biomass Pellet Production Line. Please let me know the setup cost of the Pellet Production Line.--DLKL2000
