Conduct oil heat (steam) drying drum dryer belongs to indirect heating mode, the heat conduction oil or steam drying heat, this type of dryer has low energy consumption of drying, the safety drying process, the material is not affected by heat source pollution etc.,which are widely used in the biomass, food, feed, fertilizer, bad slag chemical industry, medicine, coal, mining and other small particles or weakly caking dry powder material.
Heat conduction oil steam drum dryer, mainly composed of tube type heat exchanger, heat sources in and out the center pipe, rotary drum, feeding and discharge of the machine, induced draft fan, dust collector, and distribution cabinets. Wet material enters into the dryer, uniformly distributed in the roller feed plate and the column tube turning, with a full contact with hot conduction oil (steam) tube type heat exchanger, realizing heat transfer, mass transfer (110-250 ℃), constant temperature drying, water vaporization and scattered with the air emissions, gradually reduce the moisture from the material, the material has finished the drying process.
This type of equipment can be used for drying all kinds of coal, lignite, carbon coal, including anthracite, lean coal and poor lean coal, lean coal, coking coal, fat coal, air fertilizer coal, gas coal, coal and weakly caking coal, not sticky coal, long flame coal, lignite, coal washing, screening, raw coal, bituminous coal,the tail coal, midding coal, etc. Equipment can be made according to the customers' requirements.
Heat conduction oil steam drum dryer, mainly composed of tube type heat exchanger, heat sources in and out the center pipe, rotary drum, feeding and discharge of the machine, induced draft fan, dust collector, and distribution cabinets. Wet material enters into the dryer, uniformly distributed in the roller feed plate and the column tube turning, with a full contact with hot conduction oil (steam) tube type heat exchanger, realizing heat transfer, mass transfer (110-250 ℃), constant temperature drying, water vaporization and scattered with the air emissions, gradually reduce the moisture from the material, the material has finished the drying process.
Model | Capacity(T/D) | Initial moisture(%) | Final moisture(%) | Total Power(kw) | Covering area(m²) |
DLMG1916 | 300 | <30 | 13±2 | 130 | 42*16 |
DLMG2220 | 500 | 150 | 46*16 | ||
DLMG2522 | 800 | 200 | 48*16 | ||
DLMG2825 | 1000 | 250 | 51*16 | ||
DLMG3026 | 1300 | 280 | 52*18 | ||
DLMG3228 | 1500 | 330 | 55*18 | ||
DLMG3430 | 1800 | 380 | 56*18 | ||
DLMG3632 | 2200 | 450 | 58*18 | ||
DLMG3835 | 2700 | 560 | 60*18 | ||
DLMG4036 | 3000 | 660 | 60*18 | ||
Note: the capacity of equipment is directly related to the reduction of water content of coal. The proportion of precipitation is large, and the production capacity of equipment decreases correspondingly. Specific consulting Dingli company. |